IBM Flex System p260 Installation And Service Manual page 232

BA180008 • BA180012
BA180008
Explanation: PCI device Fcode evaluation error
Response:
1. Reboot the server.
2. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA180009
Explanation: The Fcode on a PCI adapter left a data stack imbalance
Response:
1. Check for adapter firmware updates; install the updates if available.
2. Check for server firmware updates; install the updates if available.
3. Replace the PCI adapter card.
4. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA180010
Explanation: PCI probe error; the bridge is in a freeze state
Response:
1. Reboot the server.
2. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA180011
Explanation: PCI bridge probe error; the bridge is not usable
Response:
1. Reboot the server.
2. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA180012
Explanation: PCI device runtime error; the bridge is in a freeze state
Response:
1. Reboot the server.
2. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
220
Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide