IBM Flex System p260 Installation And Service Manual page 177

B200F006 • B200F00D
B200F006
Explanation: During the startup of a partition, the code load operation for the partition startup timed out.
Response:
1. Check the error logs and take the actions for the error codes that are found.
2. Go to Isolating firmware problems.
B200F007
Explanation: During a shutdown of the partition, a time-out occurred while trying to stop a partition.
Response: Check for server firmware updates; then, install the updates if available.
B200F008
Explanation: Informational system log entry only.
Response: No corrective action is required.
B200F009
Explanation: Informational system log entry only.
Response: No corrective action is required.
B200F00A
Explanation: Informational system log entry only.
Response: No corrective action is required.
B200F00B
Explanation: Informational system log entry only.
Response: No corrective action is required.
B200F00C
Explanation: Informational system log entry only.
Response: No corrective action is required.
B200F00D
Explanation: Informational system log entry only.
Response: No corrective action is required.
165
Chapter 8. Troubleshooting