IBM Flex System p260 Installation And Service Manual page 264

C20013FF • C2002110
C20013FF
Explanation: ISL roadmap initialized successfully
Response:
1. Go to Recovering the system firmware.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
C2001400
Explanation: Initializing SP Communication Area #1
Response:
1. Go to Recovering the system firmware.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
C2001410
Explanation: Initializing startup parameters
Response:
1. Go to Recovering the system firmware.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
C20014FF
Explanation: Startup parameters initialized successfully
Response:
1. Go to Recovering the system firmware.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
C2002100
Explanation: Power on racks
Response:
1. Go to Recovering the system firmware.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
C2002110
Explanation: Issuing a power on command
Response:
1. Go to Recovering the system firmware.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
252
Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide