IBM Flex System p260 Installation And Service Manual page 164

B2003000 • B2003113
B2003000
Explanation: Informational system log entry only.
Response: No corrective action is required.
B2003081
Explanation: During the startup of a partition, the startup did not complete due to a copy error.
Response: Check for server firmware updates; then, install the updates if available.
B2003084
Explanation: A problem occurred during the startup of a partition.
The adapter type might not be supported.
Response: Verify that the adapter type is supported.
B2003088
Explanation: Informational system log entry only.
Response: No corrective action is required.
B200308C
Explanation: A problem occurred during the startup of a partition.
The adapter type cannot be determined.
Response: Verify that a valid I/O Load Source is tagged.
B2003090
Explanation: A problem occurred during the startup of a partition.
Response: Go to Isolating firmware problems.
B2003110
Explanation: A problem occurred during the startup of a partition.
Response: Go to Isolating firmware problems.
B2003113
Explanation: A problem occurred during the startup of a partition.
Response: Look for B7xx xxxx errors and resolve them.
152
Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide