IBM Flex System p260 Installation And Service Manual page 491

v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v See Chapter 7, "Parts listing for IBM Flex System p260 and p460 Compute Nodes," on page 97 to determine
which components are CRUs and which components are FRUs.
v If an action step is preceded by Trained service technician only, that step must be performed only by a trained
service technician.
Isolation
procedure or
symbolic failing
item Symptom
FSPSP42 An error
communicating
between two system
processors was
detected.
The system has
FSPSP45
detected an error
within the FSI path.
FSPSP46 Some corrupt areas
of flash or RAM
have been detected
on the service
processor.
FSPSP47 The system has
detected an error
within the PSI link.
A diagnostics
FSPSP48
function detects an
external processor
interface problem.
FSPSP49 A diagnostic function
detects an internal
processor interface
problem.
FSPSP50 A diagnostic function
detects a connection
problem between a
processor chip and a
GX chip.
Action
Contact your next level of support.
Replace the system-board and chassis assembly, as described in
"Replacing the system-board and chassis assembly" on page 83.
Replace the system-board and chassis assembly, as described in
"Replacing the system-board and chassis assembly" on page 83.
Replace the system-board and chassis assembly, as described in
"Replacing the system-board and chassis assembly" on page 83.
If the failing items preceding this isolation procedure in the failing item
list do not fix the problem, contact your next level of support.
If the failing items preceding this isolation procedure in the failing item
list do not fix the problem, contact your next level of support.
If the failing items preceding this isolation procedure in the failing item
list do not fix the problem, contact your next level of support.
Chapter 8. Troubleshooting
479