IBM Flex System p260 Installation And Service Manual page 224

BA120003 • BA130010
BA120003
Explanation: On an undetermined SCSD device, send diagnostic failed; sense data available
Response:
1. Troubleshoot the SCSD devices.
2. Verify that the SCSD cables and devices are properly plugged. Correct any problems that are found.
3. Replace the SCSD cables and devices.
4. Reboot the server.
5. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA120004
Explanation: On an undetermined SCSD device, send diagnostic failed; devofl command
Response:
1. Troubleshoot the SCSD devices.
2. Verify that the SCSD cables and devices are properly plugged. Correct any problems that are found.
3. Replace the SCSD cables and devices.
4. Reboot the server.
5. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA120010
Explanation: Failed to generate the SAS device physical location code. The event log entry has the details.
Response:
1. Reboot the server.
2. Reboot the server.
3. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA130010
Explanation: USB CD-ROM in the media tray: device remained busy longer than the time-out period
Response:
1. Retry the operation.
2. Reboot the server.
3. Troubleshoot the media tray and CD-ROM drive.
4. Replace the USB CD or DVD drive.
5. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
212
Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide