Table of Contents
Advertisement
1.LOADING PAPER
Long custom size paper on the MPT
In the printing function, you can also print the paper longer than the maximum standard paper size by setting it as a
custom size. For paper size which can be set, refer to the Specifications Guide. To learn how to set the custom size,
refer to the Printing Guide.
Move the paper holding lever toward the outside. Place paper with its print side down on the
1
MPT.
2
Align the side guides to the paper length. Move the paper holding lever toward the equipment.
3
Check that there is no gap between the paper and the side guides.
If the gap is too wide, it could cause paper jamming, or the paper size could not be correctly detected.
Between the paper and side guides ("A" in the figure):
Make sure there is no gap. (0.5 mm (0.02") or less on one side, 1.0 mm (0.04") or less in total) However, if paper
jamming occurs, make a gap.
4
Select the MPT during the operation for copying or printing and specify the paper size and
thickness.
For details for the operation for copying or printing, refer to the Copying Guide or Printing Guide.
34 Loading Paper on the MPT
A
A
Advertisement
Table of Contents
