Making Duplex Copies (Duplex Copy); Adjusting Copy Density (Density); Changing Document Type (Document Type) - Oki MB451wMFP User Manual

Configuring Copy Settings
Making Duplex Copies (Duplex
Copy)
You can copy 1-sided (simplex) and 2-sided
(duplex) documents on to one side (simplex) or
both sides (duplex) of a sheet of paper. You can
also select the binding position from either long-
edge or short-edge binding.
Specify the appropriate orientation of the
document in [Direction] beforehand to get the
copy result you want.
Note
 Use standard size plain paper for duplex copies. Using
non-standard paper may cause a paper jam in the duplex
unit of your machine.
Duplex printing cannot be done while paper is fed by
Manual Feeder in MB441, MB461 and ES4161 MFP.
Reference
 For details on the available paper for your machine, refer
to "Loading Paper" P. 32.
 For details on how to configure the [Direction] setting,
refer to "Changing Image Orientation of Document
(Direction)" P. 80.
 Long-Edge Binding
Copies your document to be bound along the
long edge of the paper.
 Short-Edge Binding
Copies your document to be bound along the
short edge of the paper.
Reference
 To set margins for binding, refer to the User's Manual
Advanced.
Enabling Duplex Copies
Press the to enter the [Change
1
Settings] menu.
Press the to select [Duplex Copy]
2
and then press .
OK
Press the
3
and then press
Settable Values for Printing Method:
OFF (Simplex)*
Simplex document → Duplex
Simplex document → Duplex
Duplex document → Duplex printing
Duplex
Duplex
Press the
4
displayed.
Note
"
 You can copy
copies only when scanning the documents from the ADF.
Memo
 When making duplex copies using the document glass, the
continuous scan mode is automatically enabled. Follow the
on-screen instructions.
Adjusting Copy Density
(Density)
You can adjust the copy density from 7 levels.
Press the
1
Settings] menu.
Press the
2
and then press
Check that [Density] is selected and
3
then press
Press the
4
density and then press
Settable Density Values:
+3 +2
Memo
 [0] is the standard value. To darken the document
image, select [+1], [+2] or [+3] (most dense).
Conversely, to lighten the document image, select
[-1], [-2] or [-3] (least dense).
Press the
5
displayed.
Changing Document Type
(Document Type)
You can select the document type to make copies
at the most suitable quality for your needs.
Press the
1
Settings] menu.
- 82 -
to select the desired value
.
OK
LE → Simplex printing
SE → Simplex printing
*indicates the factory default.
until the start screen is
" "
duplex to duplex or duplex to simplex
to enter the [Change
to select [Image Settings]
.
OK
.
OK
or to select the desired
.
OK
+1 0* -1 -2
*indicates the factory default.
until the start screen is
to enter the [Change
LE
SE
"
-3