Telnet - NETGEAR GSM7212P User Manual

SSH-2 DSA Key PEM File - SSH-2 Digital Signature Algorithm (DSA) Key File (PEM
•
Encoded)
Use Transfer Mode to specify the protocol to use to transfer the file:
2.
TFTP - Trivial File Transfer Protocol
•
SFTP - Secure File Transfer Program
•
SCP - Secure Copy
•
Use Server Address Type to specify either IPv4 or IPv6 to indicate the format of the
3.
TFTP/SFTP/SCP Server Address field. The factory default is IPv4.
Use Server Address to enter the IP address of the server in accordance with the format
4.
indicated by the Server Address Type. The factory default is the IPv4 address 0.0.0.0.
Use Remote File Name to enter the name on the TFTP server of the file you want to
5.
download. You may enter up to 32 characters. The factory default is blank.
Click APPLY to start to download the Host Key file. Note that to download SSH key files
6.
SSH must be administratively disabled and there can be no active SSH sessions.

Telnet

To display the Telnet page, click Security
Web Management User Guide

Access > Telnet.
249