Removing A Compact Flash Card - Symbol PDT 8100 Series Product Reference Manual

4. Insert the flash card into the compartment with the pins facing forward, and the
main label facing down. It only fits one way. The two metal tabs on the locking
mechanism prevent pushing the card all the way in.
Compact flash
card cover
Figure 1-4. Removing the Compact Flash Card Cover
5. To fit the card into place, push down and in at the same time, so that the lip of the
compact flash card slips under the tabs of the locking mechanism.
6. Replace the flash card cover by inserting the bottom first, and pressing the top in.
Note: After inserting or removing a compact flash card, replace the flash
card cover or the terminal will not function.
7. Insert the battery and lock the battery in place (see
1-10).

Removing a Compact Flash Card

1. Open the battery door and remove the battery and flash card cover.
2. Use the stylus to press the flash card release button inside the flash card
compartment.
Pull top out & lift
cover
Figure 1-5. Removing a Compact Flash Card
Getting Started
Insert flash card
Installing the Battery on page
1-9