Symbol PDT 8100 Series Product Reference Manual page 103

3. Start ActiveSync on the terminal (Start - ActiveSync). Tap Tools - Options... and
ensure 57600 Default is selected from the Enable synchronization when cradled
using: drop-down menu.
4. Connect the Serial/Charging Cable to the terminal and host PC as shown in
4-3.
Figure 4-3. Serial/Charging Cable Connection to Host PC
Note: The Serial/Charging cable requires a dedicated port. It cannot share
a port with an internal modem or other device. If you are unsure
about the location of the serial port on the computer, refer to the
user's manual supplied with the computer.
5. If this is the first synchronization, follow the instructions on the host computer
screen to set up the partnership. Items to be synchronized may be customized, and
the user may select to synchronize continuously as information changes, upon
connection, or manually by clicking the Sync button on the toolbar of the host
computer.
Note: Every terminal should have a unique name. Never try to synchronize
more than one terminal to the same user name.
Serial/Charging cable
Communications
To serial port of host
computer
Figure
4-7