Symbol PDT 8100 Series Product Reference Manual page 282

PDT 8100 Series with Windows Mobile 2003 Software for Pocket PCs Product Reference Guide
Table 12-1. Troubleshooting The Terminal (continued)
Problem
Terminals with an integrated imager:
The terminal does not save
images.
Aim Target or Illumination is not
available.
12-10
Cause
The still Image Capture
program is not enabled.
Aim or Illumination may be
turned off.
Solution
Enable Image Capture.
The still Image Capture
program is application
dependent. To enable the
Imager Demo application,
select Imager Demo from the
Start menu. Tap the Snap button
(in Capture mode) or press the
scan trigger to enable the
Imager Demo.
Enable Aim or Illumination.
The still Image Capture
program is application
dependent. To enable the Aim
and Illumination features in the
Imager Demo application,
select Imager Demo from the
Start menu. Select Capture from
the Mode menu. Tap the Aim
and/or Illumination check boxes
to enable.