Symbol PDT 8100 Series Product Reference Manual page 116

PDT 8100 Series with Windows Mobile 2003 Software for Pocket PCs Product Reference Guide
3. Insert the terminal into the cradle. The cradle's communication LED turns red, then
flashes green, indicating that the host computer and terminal are communicating.
See Communication LED Indicator
4. On the terminal, a succession of dialog boxes appear, indicating the status of the
connection. When successfully connected and synchronized, the status of the host
computer is Connected/Synchronized.
Note: If the terminal is removed from the cradle while the LED is flashing
green, communication is disrupted and data may be lost. When the
terminal finishes communicating, the slot's LED turns solid green
until the terminal is removed from the slot.
5. To close the ActiveSync session, tap Stop. You may remove the terminal when the
connection has closed itself.
Launching the Internet
1. On the terminal, tap Start - Settings - System - eConnect and ensure the following
settings are made:
Figure 4-10. eConnect Settings - Launching the Internet via Ethernet
2. Tap the OK button.
4-20
on page 4-32 for other indications.