Symbol PDT 8100 Series Product Reference Manual page 117

3. Insert the terminal into the cradle. The cradle's communication LED turns red, then
flashes green, indicating that the host computer and terminal are communicating.
See Communication LED Indicator
4. On the terminal, a succession of dialog boxes appear, indicating the status of the
connection.
5. Once connected, tap Start - Internet Explorer to launch the browser.
6. To close your internet session, tap the two arrows on the navigation bar to expose
the Connected dialog box, then tap the End button. You may remove the terminal
when the connection has closed itself.
Country Setup
The modem defaults to operation with US telephone networks (country code: B5). To
operate the modem with other country telephone networks, you must set the Country Code
by entering the Country of Installation command. The modem will adjust it's operating
parameters to comply with the telephone network in the country specified.
Edit Extra dial-string modem commands: text box to set country parameters.
The syntax used is: +GCI=<country_code>;
The supported countries and there codes are:
Country
Austria
Belgium
Brazil
Canada
Denmark
Finland
France
Germany
Note: It is highly recommended that you use FD where possible. If you have trouble
connecting, use the alternate code where provided.
on page 4-32 for other indications.
Code Country
FD or 0A Greece
FD or 0F Iceland
16 Ireland
20 Italy
FD or 31 Liechtenstein
FD or 3C Luxembourg
FD or 3D Mexico
FD or 42 Netherlands
Code Country
46 Norway
FD Portugal
FD or 57 Spain
FD or 59 Sweden
FD Switzerland
FD TBR-21
(Europe)
73 United
Kingdom
FD or 7B United States
Communications
Code
FD or 82
8B
FD or A0
FD or A5
FD or A6
FD
FD or B4
B5
(Default)
4-21