Symbol PDT 8100 Series Product Reference Manual page 252

PDT 8100 Series with Windows Mobile 2003 Software for Pocket PCs Product Reference Guide
• The Initial Program Loader main menu lists the partitions/applications that can
be downloaded. Auto Select (for TCM downloads only) is the default selection
and is selected if no other selection is made within 10 seconds. The version
number on the bottom of the screen identifies the version of IPL being used. By
default, each screen times out after 10 seconds.
Note: To replace the IPL, choose Monitor from the list because IPL is a
component of the Monitor. If updating the Monitor/IPL hex image, the
terminal reboots after downloading the image. If the platform or
application partition sizes are changed, you must download a new
partition table first. Partition table updates take effect immediately;
there is no need to reboot.
5. To manually select the partitions/applications to download, use the Up and Down
arrow keys to select the partition to be received, then press the Enter key.
or
Allow Auto Select to download several partitions in sequence. (Auto Select can
only be used to download and receive files via the TCM utility running on a host
PC.)
6. The Select Transport menu displays (see
Up and Down arrow keys to select the transport method on this screen. The
choices are Serial Port or Compact Flash (CF) card.
Note: The first time this menu is entered, the default transport method is
Serial Port. When accessed again, the default transport method is
11-14
Figure 11-8). In manual mode, use the