Symbol PDT 8100 Series Product Reference Manual page 63

Key
Note:
1
Press Func, then another key to produce the value or function above that key. See
individual key descriptions in this table for additional Function key usage.
2
Press Func + Ctrl + Clear to close applications.
Alpha Press Alpha to toggle between alpha and numeric mode. In alpha mode,
pressing a key produces the yellow letter on that key; in numeric mode,
pressing a key produces the number in gray or character in white.
Backlight See Using the Backlight Button
Caps/Shift Press Shift when in alpha mode, then another key to capitalize the letter on
that key.
Press Func + Shift to toggle All Caps on and off.
Clear Press Clear to generate an Escape key. This is application dependent but
typically closes a window or clears the screen.
Cursor keys: Press Func + a cursor key to move the cursor up, down, left, and right on
C, G, H, I the screen.
End Press End to generate an End key. This is application dependent but
typically moves the cursor to the end of line.
Escape/Enter Press Enter after entering data or a command.
Press Func + Enter to generate an Escape key. This is application
dependent but typically closes a window or clears the screen.
Power See Using the Power Button
Scan Press Scan to scan bar codes. (Also use right and left scan triggers.)
When an imager application is running, the scan trigger can be used to
acquire an image. (This is application dependent and applicable only to
terminals with an integrated imager.)
Note: By default, each scan trigger appears to be Trigger #1. The actual
trigger cannot be determined via software. A registry entry exists to have the
Triggers act independently as Trigger #1 to Trigger #5, so that separate
actions can be assigned to the triggers. For more details, refer to the
Windows CE Help File for Symbol Terminals (Help File).
Send The Send key is application dependent.
Table 2-3. 37-key Keyboard Actions
on page 2-3.
Operating the Terminal
Action
on page 2-3.
2-9