Acquiring Other Still Images - Symbol PDT 8100 Series Product Reference Manual

PDT 8100 Series with Windows Mobile 2003 Software for Pocket PCs Product Reference Guide
7. Press and release the trigger. A beep sounds to indicate a successful image
capture.
The captured image appears on the terminal's display until the terminal is enabled
to capture another image or another image is opened from the File menu.

Acquiring Other Still Images

1. Launch the Imager Demo application by tapping Start - Imager Demo. The Symbol
Image Capture screen displays.
2. Ensure the imager is enabled. The imager is enabled when a video image appears
on the terminal's display.
To enable the imager, press the trigger or tap Enable in Capture mode.
3. If the image to acquire requires editing, tap the Mode menu and select the
appropriate mode (Format, Edit, Crop, Scan and Capture). Each mode allows you
to edit the image on the display prior to acquiring the image. (See
Demo Modes
Note: Ensure the ViewFinder is selected in Capture mode to view the
image on the terminal's display.
4. Aim the exit window at the image to capture.
5. Press and release the trigger. A beep sounds to indicate a successful image
capture.
The captured image appears on the terminal's display until the terminal is enabled
to capture another image or another image is opened from the File menu.
C-30
on page C-22 for information about each mode.)
Using Imager