Symbol PDT 8100 Series Product Reference Manual page 228

PDT 8100 Series with Windows Mobile 2003 Software for Pocket PCs Product Reference Guide
this option was previously disabled, refresh the Available WLAN Networks window
to display the AP networks available to the terminal.
2. Select the Access Ad-Hoc networks check box to display available peer (adapter)
networks and their signal strength within the Available WLAN Networks. These are
peer networks available to the terminal profile for association. If this option was
previously disabled, refresh the Available WLAN Networks window to display the
Ad Hoc networks available to the terminal.
3. Select the Disable Profile Roaming check box to configure the adapter WLAN
profile not to roam to the next available WLAN profile when the terminal moves out
of range of the current WLAN profile.
4. Select the Enable Sounds check box to initiate an audible signal when performing
a ping test and associating with an AP. The tones are important to notify users if
the pinging is received or if the terminal has roamed to another AP.
5. Select the Enable Rogue AP Detection check box to inform the system of
unauthorized APs on the network. (Symbol infrastructure is required.)
Note: Mobile Companion has a password protection feature. When Mobile
Companion initially appears, the password is off by default.
6. To create a password for the first time, change an existing password. or delete a
password tap Change Password.
Figure 9-40. Mobile Companion - Password Window
9-46