Removing A Compact Flash Card - Symbol QRG PDT 8100 Quick Reference Manual

P D
w i t h
2 0 0 3
2. Remove the flash card cover at the top of the battery compartment
by pulling the top out, and lifting the cover up.
3. Insert the flash card into the compartment with the pins facing for-
ward, and the main label facing down. It only fits one way. The two
metal tabs on the locking mechanism will prevent you from pushing
the card all the way in.
Compact flash
card cover
4. To fit the card into place, push down and in at the same time, so that
the lip of the compact flash card slips under the tabs of the locking
mechanism.
5. Replace the flash card cover by inserting the bottom first, and press-
ing the top in.
Note: After you insert or remove a compact flash card, you must re-
place the flash card cover or the terminal will not function.
6. Reinsert the battery and battery door.
7. Perform a soft reset (see

Removing a Compact Flash Card

1. Open the battery door and remove the battery and flash card cover.
2. Use the stylus to press the flash card release button inside the flash
card compartment.
T 8 1
W i n d
f o r
Pull top out & lift cover
Performing a Soft Reset on page
0 0 S
o w s
P o c k
6
e r i e s
M o b i
e t P C
Insert flash
card
25).
l e
s