PDT 8100 Series with Windows Mobile 2003 Software for Pocket PCs Product Reference Guide
Configuring the Cradle
Cradle Setup
Setup the CRD 8100-4200E as shown in
IP Address Configuration
The cradle must be configured with IP addresses to be used by the cradle and four slots.
Three methods of acquiring these addresses are provided in the cradle configuration:
•
6 DHCP Address mode (default)
•
1 DHCP NAPT Address mode
•
Static Address mode.
6 DHCP Address Mode (Default)
In this mode, the cradle's default mode, the cradle acquires six IP addresses dynamically
from a DHCP server. A DHCP server or a DHCP relay agent must be on the same subnet
as the cradle. The server automatically provides the cradle with:
•
one IP address for the cradle
•
four IP addresses for the four cradle slots
•
one IP address for the expansion port.
4-24
Figure
Figure 4-11. Connecting the Cradle
4-11.
Ethernet Cable
To Ethernet hub