Creating A Splash Screen - Symbol PDT 8100 Series Product Reference Manual

Error
Corrupt TCM.INI file!
(Invalid value of
VolumeDivisor)
Invalid version of TCM
script file
Corrupt or missing TCM.ini
file
FAILED CONNECTION TO
COM PORT (Could not get
status)
FAILED CONNECTION TO
TERMINAL (Terminal Not
Connected Properly/
Terminal Not Ready to
Receive)

Creating a Splash Screen

The source bitmap files used to create the default splash screens for the mobile computer
are supplied with the DCP for PDT8100Xw. These files can be modified using any of the
standard windows image editors, allowing customization for particular customers.
To create a custom splash screen, perform the following steps:
1. For mobile computers with monochrome screens, open the Splashmono.bmp file
supplied with the DCP for PDT8100Xw using an image editor.
2. For mobile computers with color screens, open the Splashcolor.bmp file supplied
with the DCP for PDT8100Xw using an image editor.
3. Modify the bitmap file and save.
4. Create a splash partition using the steps shown in the
11-11.
Table 11-3. TCM Error Messages (continued)
The VolumeDivisor entry is missing or invalid in the TCM.ini. Reinstall
TCM or recover TCM.ini.
The TCM script was not created by this version of TCM.
TCM could not find TCM.ini file.
While downloading images to terminal, TCM failed to connect to the
selected COM port. Check if the COM port is free and is properly
configured.
While downloading images, TCM failed to connect to the terminal.
Check if the correct flow control protocol is selected and the terminal
is properly connected and is in a listening state.
Configuring The Terminal
Description/Solution
Building the Image on page
11-27