Removing A Compact Flash Card; Starting The Pdt 8100 - Symbol PDT 8100 Series Quick Reference Manual

Q u i c k

Removing a Compact Flash Card

1. Open the battery door and remove the battery and flash card
cover.
2. Use the stylus to press the flash card release button inside
the flash card compartment.

Starting the PDT 8100

Press the red power button to turn the PDT 8100 on and off. If the
terminal does not power on, perform a hard reset. See
a Hard Reset on page
Power
Button
As the terminal initializes its unique Flash File system, the Symbol
splash screen displays for about 10 seconds.
When the Welcome screen appears, tap anywhere on the screen
to continue to the Align screen. Note that these screens also
appear every time you perform a hard reset.
R e f e r e n c e
25.
11
Performing