Installing A Sim Card; Inserting A Compact Flash Storage Card - Symbol PDT 8000 Series Product Reference Manual

PDT 8000 Series Product Reference Guide

Installing a SIM Card

Note: A SIM card can only be installed in the WAN-enabled terminals, i.e.
PDT 8037 and PDT 8056.
1. Slide the latches on the battery door up and lift the battery door away from the terminal. If the battery
is installed, remove it (see
2. Slide the metal clip on
the SIM cardholder
door to the left to
release the SIM
cardholder.
4. Insert the card
between the
cardholder body and
the metal clip; be sure
the beveled corner of
the SIM card is on the
top left.
7. Reinsert the battery and replace battery door (see

Inserting a Compact Flash Storage Card

Note: A compact flash storage card can be installed in the PDT 8000,
PDT 8037 and PDT 8046 only.
The terminal has a slot for a compact flash storage card which includes a compartment door
that prevents the card from coming out if the terminal is dropped.
1-24
Installing Batteries
SIM Card
Contact Area
on page 1-8).
3. Lift the cardholder
door to an upright
position
5. Close the cardholder
door (with the contact
area of the card
facing down).
6. Slide the metal clip to
the right to lock it in
place.
Installing Batteries on page 1-8).