Mdm8100-150 Modem Module - Symbol PDT 8100 Series Product Reference Manual

PDT 8100 Series with Windows Mobile 2003 Software for Pocket PCs Product Reference Guide

MDM8100-150 Modem Module

Symptom
Terminal battery is not charging
through the Power Connector.
12-20
Table 12-6. Troubleshooting the MDM8100-150
The power cable is not fully
connected.
Terminal and modem were
unplugged from AC power too
soon.
Battery is faulty.
MDM8100 device is not
securely attached to the bottom
of the terminal.
Cause
Ensure the power cable is
connected securely to both the
MDM8100 and to AC power.
Plug the terminal and modem
back into the AC power source.
If a battery pack is fully
depleted, it can take 2.5 hours
to fully recharge a 1950 mAh
battery (if the terminal is
suspended) and longer if the
terminal is operating.
Verify that other batteries
charge properly. If so, replace
the faulty battery.
Remove and re-attach the
MDM8100, ensure it is firmly
attached on the bottom of the
terminal. Verify that the battery
is charging by tapping Start -
Settings - System - Power.
Solution