Symbol PDT 8100 Series Product Reference Manual page 128
With windows mobile 2003 software for pocket pcs
Hide thumbs
Also See for PDT 8100 Series:
- Product reference manual (358 pages) ,
- Supported equipment manual (102 pages) ,
- Quick reference manual (48 pages)
Table of Contents
Advertisement
PDT 8100 Series with Windows Mobile 2003 Software for Pocket PCs Product Reference Guide
6. To close your internet session, tap the two arrows on the navigation bar to expose
the Connected dialog box, then tap the End button. You may remove the terminal
when the connection has closed itself.
Communication LED Indicator
No Light
Solid Red
Flashing Green
Slow Flashing Red
Fast Flashing Red
Solid Green
All LEDs Flashing Red
4-32
Table 4-1. Communication LED Indicators
LED
Cradle is not powered; terminal(s) not placed
correctly; or, there is no terminal in the cradle.
Terminal is present, but communication has not
started.
Terminal is present and is communicating with the
host computer.
Error - communication did not start.
Warning: Terminal inactivity timeout. The terminal
did not finish data synchronization or had an open
connection for more than 15 minutes. This time is
programmable in the cradle flash parameters.
Terminal is present and communication is
complete.
Failed automatic cradle configuration via local
DHCP Service.
Indication
Advertisement
Table of Contents
