Symbol PDT 8100 Series Product Reference Manual page 201
With windows mobile 2003 software for pocket pcs
Hide thumbs
Also See for PDT 8100 Series:
- Product reference manual (358 pages) ,
- Supported equipment manual (102 pages) ,
- Quick reference manual (48 pages)
Table of Contents
Advertisement
Transmission Tab
The Transmission tab displays a real-time graph as a series of ICMP ping tests initiated by
the user. The transmission quality test does not run all the time because it consumes
network bandwidth.
The transmission quality test also displays a description of the transmission quality.
Figure 9-13. NICTT Properties - Transmission Tab
Note: A DHCP lease must be obtained before running the Transmission
Quality test.
1. Select or enter a target device IP address from the Host Address field.
2. Select the size of the packet transmission from the Test Count drop-down list.
3. Tap Start Test to begin the ping test.
4. Tap Stop Test to terminate the ping test.
The average mega-bits per second, signal strength, data rate currently in use, test
statistics and round trip (RT) times are displayed for each test. The associated AP
MAC address is also displayed. The signal strength level and the data transmission
rate are displayed in real-time bar graphs.
Spectrum24 Network Configuration
9-19
Advertisement
Table of Contents
