Crop Mode
Tap Mode - Crop to display the Crop mode:
Figure C-15. Symbol Image Capture - Crop Mode
As needed, define/control the settings in this mode as follows:
•
Use the stylus on the terminal's display and drag a rectangle to crop the image. You
can also crop the image by entering numeric values in the Cropping Rectangle
boxes.
•
Select a crop style from the Crop Style drop-down list.
•
Tap Reset to return settings to their default values.
•
Tap the check box to enable or disable Video VF Crop Settings.
The settings defined in this mode can also be defined in ImgCap and VFCap tab views
(Tools - Imager Settings - ImgCap tab or VFCap tab). See
Table C-3 on page C-14
steps to acquire an image.
for field descriptions. See
Imager Demo Application
Table C-2 on page C-10
Capturing Images
on page C-28 for the
and
C-25