Using The Snap-On Charging Adapter - Symbol PDT 8100 Series Product Reference Manual

Using the Snap-On Charging Adapter

To charge the battery in the terminal using the VCA-8100 Charging Adapter, setup as
shown below (Figure
2
Power Indicator Green
Figure 1-9. Snap-on Charging Adapter Connection
The terminal's battery begins charging automatically. See
Memory Backup Battery for the First Time
on page 1-13 for the times needed to fully charge the battery. See
1-25 for battery charging indications.
1-9).
1
Charging the Main Battery and
on page 1-13 and Recharging the Main Battery
Getting Started
LED Indicators on page
1-17