Replacing The Staple Cartridge - Fuji Xerox D125 Quick Reference Manual

Hide thumbs Also See for D125:
Table of Contents

Advertisement

5 Maintenance
6
Hold the center top part of the waste toner
container and push it in all the way into the
machine.
Important • When inserting the waste toner container,
7
Close the waste toner container cover.
8
Close the front cover.
Note

Replacing the Staple Cartridge

When the staple cartridge needs to be replaced, a message appears on the touch
screen. When this message appears, replace the staple cartridge.
5
Important • The use of staple cartridges not recommended by Fuji Xerox may impair quality and
Note
1
Make sure that the machine is not in
operation, and open the finisher right door.
2
Hold the handle [R1] at the position shown in
the figure.
96
do not grip the handle of the container.
• A message will be displayed and the machine will not operate if the front cover is even
slightly open.
Caution
Waste staples may come out with output paper. Be careful not to get injured by the
staples.
Do not staple punched holes of paper. Sharp points of a staple may cause injuries.
performance. Use only staple cartridges recommended by Fuji Xerox for the machine.
• When the staple cartridge is not replaced properly, the message remains on the touch screen.
Follow the procedure and replace the staple cartridge again.
• To order a staple cartridge, contact our Customer Support Center.

Advertisement

Table of Contents
loading

This manual is also suitable for:

D110D95

Table of Contents