When Not Using A Receiver - Fuji Xerox ApeosPort-IV C7780 User Manual

When Not Using a Receiver

1
Adjust the volume of the line monitor.
We recommend that you set the volume of the line monitor to [Loud] so that you can
hear the voice prompts clearly.
For information on how to change the volume of the line monitor, refer to "5 Tools" > "Common
Service Settings" > "Audio Tones" > "Line Monitor Volume" in the Administrator Guide.
2
Select [On-hook (Manual Send/Receive)] on
the [More Options] screen.
3
Select [Manual Receive] from the drop-down menu.
4
Specify the fax number of the facsimile information service.
You can use the numeric keypad, address numbers, or one touch buttons to specify
the call destination, but cannot use the Address Book.
You can use the keyboard displayed on the screen to specify the call destination.
Selecting [More Characters] on the screen displays symbols.
Note • When the line type is set to a tone line, [:] (Tone) does not appear. If you want to send tones
• Some touch-tone services may not be available even if you set your telephone to send
5
When the machine connects to the service, you will hear voice prompts. Follow the
voice prompts to enter the required numbers.
6
After entering the numbers, press the <Start> button.
(or to use the touch-tone services) while using a pulse line, select [:] (Tone).
tones.
Facsimile Information Services
4
253