Adjusting The Needle Thread Clamp Notch - JUKI AMS-210EN Series Engineer's Manual

(40) Adjusting the needle thread clamp notch

1. Needle thread clamp notch R position
• When the needle thread clamp link complete
clamp release plate
needle thread clamp device
and H type).
B
2. Needle thread clamp notch F position
• When the needle thread clamp link complete
clamp release plate
needle thread clamp device
H type).
B
Standard Adjustment
and the needle thread clamp device
and the needle thread clamp base
and the needle thread clamp device
and the needle thread clamp base
– 63 –
is pushed in Direction A and Part B of the needle thread
begins to open, the distance between the
becomes 17.5mm (common to S
S and H: specifications in common
B
17.5mm
is pushed in Direction C and Part B of the needle thread
begins to open, the distance between the
becomes 22mm (common to S and
S and H: specifications in common
B
E
22mm
D
Contact
A
C
Contact