Table of Contents
Advertisement
4 Paper and Other Media
2
Hold the center of the paper guides and slide
them to the desired paper size.
3
Load paper with the side to be copied or
printed on facing up, and insert the paper
lightly along the paper guide until it stops.
Important • Do not load mixed paper types into the
4
When loading a non-standard paper size on
Tray 5 (Bypass), move the paper guides to accommodate the paper.
4
Loading Tab Paper in Tray 5 (Bypass)
The following describes the procedure for loading tab paper in Tray 5 (Bypass).
Important • Tab paper can be used only for [Tab Margin Shift], Covers, and Separators.
Note
1
Open Tray 5 (Bypass).
Note
70
tray.
• Do not load paper exceeding the
maximum fill line. It might cause paper
jams or machine malfunctions.
• When adding paper to Tray 5 (Bypass), remove any paper remaining in the tray, and then
load the removed paper with the new stack of paper.
• Before loading paper in a tray, fan the paper well. It prevents paper from sticking to each
other and reduces paper jams.
• When a paper jam occurs, the machine outputs unnecessary paper after you have cleared
the paper jam, and resumes copying or printing. For example, you load 5-tab paper and set
[Add Tab Stock] to five. If a paper jam occurs when copying the fourth page, the machine will
automatically output the fifth page and the first page to the third page of the next paper set
after you have cleared the paper jam, and then the machine resumes copying.
• When copying with the [Tab Margin Shift] feature is interrupted, a confirmation screen will
appear on the touch screen after the interrupt mode is exited. Load the tab paper according
to the message.
• If necessary, extend the extension flap.
The extension flap can be extended in
two stages. When pulling out the
extension flap, do it gently.
Advertisement
Table of Contents
