Table of Contents
Advertisement
4 Paper and Other Media
5
Push the tray in gently until it stops.
Changing the Paper Size for Trays 6 and 7 (A4 High Capacity Feeder
(Optional))
The following describes how to change the paper size for Trays 6 and 7 (A4 High
Capacity Feeder (optional)).
Note
1
Pull out the tray towards you until it stops.
When pulling out the paper tray,
do it slowly. If pulled out with too
4
much force, the tray can hit and
injure your knees.
Important • While the machine is processing a job, do
2
Remove any paper loaded in the tray.
3
Loose the screw on the right to remove your
side and the other side guide.
4
Attach the guides according to the hole of
the paper size to change, and tighten the
screws.
84
• If the number of sheets is 100 or less, the paper guides touch too tightly against the paper,
causing the paper to deform and resulting in paper jams.
• Position the guides correctly to match the paper size. If the position of the guide is not
correct, the paper may not be fed properly, causing paper jams.
• When changing the paper size to non-standard size loaded in trays 6 and 7, contact your
Customer Support Center. If doing so, it never returns to the original setting.
CAUTION
not pull the tray out that the job uses.
• Do not add a new stack of paper on top of the remaining paper in the tray to prevent paper
jams or misloading.
Advertisement
Table of Contents
