Table of Contents
Advertisement
3
If the paper feeding performance is not
improved after step 2, slide the switch on the
right front side towards the back of the
machine until it stops.
Note
4
Push the tray in gently until it stops.
Loading Paper in Trays 6 and 7 (A4 High Capacity Feeder (Optional))
The following describes the procedure for loading paper in Trays 6 and 7 (A4 High
Capacity Feeder (optional)).
Note
For information about changing the paper size and orientation, refer to "Changing the Paper Size for
Trays 6 and 7 (A4 High Capacity Feeder (Optional))" (P.84).
1
Pull out the tray towards you until it stops.
CAUTION
When pulling out the paper tray,
do it slowly. If pulled out with too
much force, the tray can hit and
injure your knees.
Important • While the machine is processing a job, do
2
Load paper against the right edge of the tray
with the side to be copied or printed facing
up.
Important • Do not load paper exceeding the
3
Push the tray in gently until it stops.
Loading Paper in Trays 6 and 7 (High Capacity Feeder C2-DS (Optional))
The following describes the procedure for loading paper in Trays 6 and 7 (High
Capacity Feeder C2-DS (optional)).
Note
For information about changing the paper size and orientation, refer to "Changing the Paper Size for
Trays 6 and 7 (High Capacity Feeder C2-DS (Optional))" (P.85).
• To return the switch to its original
position, slide it towards you until it stops.
• Before loading paper in a tray, fan the paper well. It prevents paper from sticking to each
other and reduces paper jams.
not pull out the tray that the job uses.
maximum fill line. It might cause paper
jams or machine malfunctions.
• Before loading paper in a tray, fan the paper well. It prevents paper from sticking to each
other and reduces paper jams.
Loading Paper
M A X
4
75
Advertisement
Table of Contents
