Table of Contents
Advertisement
6 Problem Solving
2
Remove the jammed paper and all paper
loaded in Tray 5 (Bypass).
Important • When two or more sheets of paper are
Note
3
Close the top cover.
4
Fan the paper you removed making sure that all four corners are neatly aligned.
5
Insert the paper into the tray with the printing
side facing up until its leading edge lightly
touches against the paper feed entrance.
Note
Paper Jams in Tray 5 (Bypass) with A3 High Capacity Feeder (Optional)
6
The following describes clearing paper jams from Tray 5 (Bypass) when A3 High
Capacity Feeder (optional) is installed.
1
Remove any paper placed or jammed in
Tray 5 (Bypass).
Important • When two or more sheets of paper are
Note
2
If the paper cannot be removed in step 1,
clear the paper jam by opening the front
cover of the High Capacity Tray Unit.
For information about clearing paper jams from the
High Capacity Tray Unit, refer to "Paper Jams in Tray
6 (A3 High Capacity Feeder (Optional))" (P.117).
114
loaded, remove all of the sheets from the
tray.
• If paper is torn, check for any torn pieces
of paper inside the machine.
• Do not load paper exceeding the
maximum fill line. It might cause paper
jams or machine malfunctions.
loaded, remove all the sheets from the
tray.
• If paper is torn, check for any torn pieces
of paper in the tray.
Advertisement
Table of Contents
