Table of Contents
Advertisement
6 Problem Solving
4
If paper is jammed at the top of the transfer
module or inside the fusing unit, remove the
paper by pulling it out toward the left.
If the paper cannot be removed, lift up the
handle [2c] and then try removing it.
Important • Do not touch the six protrusions that you
5
Lift up the handle [2c] as necessary (1), shift
the handle [2d] (2), and then remove the
jammed paper.
Important • Do not touch the six protrusions that you
6
Turn the knob [2f] as necessary, and then
remove the jammed paper.
6
7
Shift the handle [3b] on the right of the fusing
unit as necessary and then remove the
jammed paper.
Important • If the jammed paper remains inside and it
8
Insert the transfer module completely (1) and
turn the green handle [2] to the left (2).
Note
9
Close the front cover.
Note
130
see when you lift up the handle [2c].
see when you lift up the handle [2c].
is difficult to remove, pull out the duplex
module after returning the transfer
module to the original position.
• If you cannot turn the handle, pull out the
transfer module halfway and insert it
again.
• If the front cover is not completely closed, a message will appear and the machine will not
operate.
Advertisement
Table of Contents
