Table of Contents
Advertisement
3
With the side to be copied or printed on
facing up, load approximately 100 to 500
sheets of paper in the tray and align the
edges of the paper in the arrow direction (1).
Hold the long-side paper guide and slide it to
the desired paper size (2).
Important • When you load tab paper, place the paper
4
With the side to be copied or printed on
facing up, load the remaining paper and
align the edges of the paper in the arrow
direction (1). Hold the short-side paper guide
on the left side and slide it to the desired
paper size (2).
Important • Do not load paper exceeding the
5
Push the tray in gently until it stops.
About Weight Switch Buttons for Tray 6 (A3 High Capacity Feeder (Optional))
This section describes the weight switch buttons.
Tray 6 (A3 High Capacity Feeder (optional)) has weight switch buttons designed for
helping feed paper heavier than 256 gsm.
As D125/D110/D95 only support paper types weighing 52 to 253 gsm, you need to
switch the weight switch buttons to [
In case the weight switch buttons are moved for some reason, slide the buttons back
to [
Important • To avoid causing paper jams or malfunctions, make sure the buttons are in the correct
1
Pull out Tray 6 towards you until it stops.
CAUTION
When pulling out the paper tray,
do it slowly. If pulled out with too
much force, the tray can hit and
injure your knees.
Important • While the machine is processing a job, do
with its tab side to the left.
maximum fill line. It might cause paper
jams or machine malfunctions.
• If the number of sheets is 100 or less, the paper guides touch too tightly against the paper,
causing the paper to deform and resulting in paper jams.
• Position the guides correctly to match the paper size. If the position of the guide is not
correct, the paper may not be fed properly, causing paper jams.
] according to the following procedure.
positions before using Tray 6 (A3 High Capacity Feeder (optional)).
not pull out the tray that the job uses.
].
Loading Paper
4
73
Advertisement
Table of Contents
