Improving The Paper Feeding Performance In Trays 6 And 7 (High Capacity Feeder C2-Ds (Optional)) - Fuji Xerox D125 Quick Reference Manual

7
Push the tray in gently until it stops.
Note
Improving the Paper Feeding Performance in Trays 6 and 7 (High
Capacity Feeder C2-DS (Optional))
This section describes how to improve the paper feeding performance.
If images are skewed even when paper is loaded correctly, use the following procedure
so that the paper might be fed more accurately.
Important • If any of the following types of paper is loaded in the tray, performing the procedure in this
1
Pull out the tray towards you until it stops.
CAUTION
When pulling out the paper tray,
do it slowly. If pulled out with too
much force, the tray can hit and
injure your knees.
Important • While the machine is processing a job, do
2
Slide the switch on top of the long-side paper
guide to the right until it stops.
Note
• If the number of sheets is 100 or less, the paper guides touch too tightly against the paper,
causing the paper to deform and resulting in paper jams.
• Position the guides correctly to match the paper size. If the position of the guide is not
correct, the paper may not be fed properly, causing paper jams.
• When removing the HCF Post Card Kit
from the tray, completely loosen the
screw before removing the kit. Place the
removed HCF Post Card Kit back to its
original location (1). Then, tighten the
screw (2).
section may cause the paper to be fed improperly, resulting in paper jams.
- Plain - Special 1 (64 - 105 gsm)
- Recycled - Special 1 (64 - 105 gsm)
- Heavyweight SP1 (106 - 216 gsm)
- Extra-HW (217 - 253 gsm)
- Extra-HW SP1 (217 - 253 gsm)
- HW Tab Stock (217 - 253 gsm)
- Labels (106 - 216 gsm)
- Gloss (64 - 105 gsm)
- Gloss B (136 - 216 gsm)
not pull out the tray that the job uses.
• To return the switch to its original
position, slide it to the left until it stops.
- Pre-Printed SP1 (64 - 105 gsm)
- Plain Reload SP1 (64 - 105 gsm)
- HW Pre-Printed SP1 (106 - 216 gsm)
- X-HW Pre-Printed (217 - 253 gsm)
- X-HW Pre-Printed SP1 (217 - 253 gsm)
- Transparency
- Heavyweight Labels (217 - 253 gsm)
- Gloss A (106 - 135 gsm)
- Heavyweight Gloss (217 - 253 gsm)
Loading Paper
4
79