Table of Contents
Advertisement
4 Paper and Other Media
2
Load and align the edge of the paper against
the left edge of the tray with the side to be
copied or printed on facing down.
Important • Do not load paper exceeding the
3
Push the tray in gently until it stops.
Important • When pushing the paper tray in, do it slowly. If the tray is pushed with too much force, it
Loading Tab Paper in Trays 3 and 4
The following describes the procedure for loading tab paper in Trays 3 and 4.
Important • Tab paper can be used only for [Tab Margin Shift], Covers, and Separators.
4
Note
1
Pull out the tray towards you until it stops.
When pulling out the paper tray,
do it slowly. If pulled out with too
much force, the tray can hit and
injure your knees.
Important • While the machine is processing a job, do
2
Push the paper guide levers, and slide them
to their new positions to accommodate the
size of tab paper.
3
Make sure that the levers are positioned correctly, and release them.
68
maximum fill line. It might cause paper
jams or machine malfunctions.
• Do not place any paper or objects in the
empty space on the right side of Tray 3 or
4. It may cause paper jams or machine
malfunctions.
• Make sure that the paper guide is adjusted to the size of the paper loaded.
might cause machine malfunctions.
• Before loading paper in a tray, fan the paper well. It prevents paper from sticking to each
other and reduces paper jams.
• When a paper jam occurs, the machine outputs unnecessary paper after you have cleared
the paper jam, and resumes copying or printing. For example, you load 5-tab paper and set
[Add Tab Stock] to five. If a paper jam occurs when copying the fourth page, the machine will
automatically output the fifth page and the first page to the third page of the next paper set
after you have cleared the paper jam, and then the machine resumes copying.
• When copying with the [Tab Margin Shift] feature is interrupted, a confirmation screen will
appear on the touch screen after the interrupt mode is exited. Load the tab paper according
to the message.
CAUTION
not pull the tray out that the job uses.
M A X
Advertisement
Table of Contents
