Changing The Paper Settings - Fuji Xerox D125 Quick Reference Manual

Changing the Paper Settings

This section describes how to change the paper type for the trays.
After loading paper in a tray, specify the paper type setting.
Note
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with
the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next]
and enter the system administrator's
passcode, and select [Enter].
Note
3
Select [Tools] on the [Services Home]
screen.
Note
4
Select [System Settings] > [Common
Service Settings] > [Paper Tray Settings].
• Users can name Custom 1 to Custom 5 displayed in the paper type settings. For information
on how to set names to Custom 1 to Custom 5, refer to "5 Tools" > "Common Service
Settings" > "Paper Tray Settings" > "Custom Paper Name/Color" in the Administrator Guide.
• You can change the paper type setting without entering to the System Administration mode
on the [Setup] screen, which is displayed by selecting [Setup] in the [Services Home] screen
if you configure the settings in advance. For more information, refer to "5 Tools" > "Common
Service Settings" > "Paper Tray Settings" > "Customize Paper Supply Screen" in the
Administrator Guide.
• The default user ID is "11111".
• The default passcode is "x-admin".
• When the [Services Home] screen is not
displayed on the touch screen, press the
<Services Home> button.

Changing the Paper Settings

<Log In/Out> button
4
87