Paper Jams In Duplex Module 3 - Fuji Xerox D125 Quick Reference Manual

Hide thumbs Also See for D125:
Table of Contents

Advertisement

6 Problem Solving
2
Pull out Tray 1.
When pulling out the paper tray,
do it slowly. If pulled out with too
much force, the tray can hit and
injure your knees.
3
Pull out the Transport Unit 4.
Note
4
Lift up the handle [4a], and then remove the
jammed paper.
Note
6
5
Return the handle [4a] to the original position.
6
Push in Tray 2 gently until it stops.
Note
7
Push in Tray 1 gently until it stops.
8
Close the front cover.
Note

Paper Jams in Duplex Module 3

The following describes how to clear paper jams in the Duplex Module 3.
1
Make sure that the machine is not in
operation, and open the front cover.
112
CAUTION
• When the Transport Unit 4 is pulled out,
Tray 2 will be pulled out simultaneously.
• If paper is torn, check for any torn pieces
of paper inside the machine.
• When Tray 2 is pushed, the Transport Unit 4 will be pushed in simultaneously.
• If the front cover is not completely closed, a message will appear and the machine will not
operate.

Advertisement

Table of Contents
loading

This manual is also suitable for:

D110D95

Table of Contents