Table of Contents
Advertisement
3
If the paper cannot be removed in steps 1
and 2, open the top cover of Tray 5 (Bypass)
and remove the jammed paper.
Note
4
Close the top cover of Tray 5 (Bypass).
5
Fan the paper you removed making sure that
all four corners are neatly aligned.
6
Insert the paper into the tray with the printing
side facing up until its leading edge lightly
comes up against the paper feed entrance.
Note
Paper Jams in Tray 5 (Bypass) with A4 High Capacity Feeder (Optional)
The following describes clearing paper jams from Tray 5 (Bypass) when A4 High
Capacity Feeder (optional) is installed.
1
Remove any paper placed or jammed in
Tray 5 (Bypass).
Important • When two or more sheets of paper are
Note
2
If the paper cannot be removed in step 1,
clear the paper jam by opening the front
cover of the High Capacity Tray Unit.
For information about clearing paper jams from the
High Capacity Tray Unit, refer to "Paper Jams in
Trays 6 and 7 (A4 High Capacity Feeder (Optional))"
(P.121).
3
If the paper cannot be removed in steps 1
and 2, open the top cover of Tray 5 (Bypass)
and remove the jammed paper and any
paper loaded.
4
Close the top cover of Tray 5 (Bypass).
• If paper is torn, check for any torn pieces
of paper in the tray.
• Do not load paper exceeding the
maximum fill line. It might cause paper
jams or machine malfunctions.
loaded, remove all the sheets from the
tray.
• If paper is torn, check for any torn pieces
of paper in the tray.
Paper Jams
6
115
Advertisement
Table of Contents
