Table of Contents
Advertisement
2
Pull out the hole punch waste container [R4]
towards you.
3
Discard all the scraps.
4
Insert the empty hole punch waste container
all the way into the machine.
5
Close the finisher right door.
Note
Emptying the Trimmer Waste Container
When the trimmer waste container becomes full, a message appears on the touch
screen. Discard the scraps according to the message.
If you take the trimmer waste container out of the machine, make sure to empty it
completely. If it is reinstalled with some scraps remaining, it may become full before the
message appears again, and this can cause machine breakdown.
Important • When emptying the trimmer waste container, make sure that the machine is switched on. If
1
Make sure that the machine has stopped,
and pull out the trimmer waste container
slowly.
• A message will be displayed and the machine will not operate if the finisher right door is
even slightly open.
not switched on, the machine will not recognize that the trimmer waste container has been
emptied.
• Do not pull out the belt of the trimmer waste container with an excessive force.
Replacing Consumables
101
5
Advertisement
Table of Contents
