Table of Contents
Advertisement
4 Paper and Other Media
3
If the paper feeding performance is not
improved after step 2, slide the switch on the
right front side towards the back of the
machine until it stops.
Note
4
Push the tray in gently until it stops.
Loading Paper in Tray 8 (Inserter)
The following describes the procedure for loading paper in Tray 8 (Inserter).
Tray 8 (Inserter) allows you to load paper (blank, copied paper, etc.), which will only be
used as separators and covers, so that the machine does not output on the paper
loaded in this tray.
Note
4
1
Hold the center of the paper guides and slide
them to the desired paper size.
2
Load the paper, neatly aligning all edges.
Important • Do not load paper exceeding the
Loading Tab Paper in Tray 8 (Inserter)
The following describes the procedure for loading tab paper in Tray 8 (Inserter).
1
Hold the center of the paper guides and slide
them to the desired paper size.
80
• To return the switch to its original
position, slide it towards you until it stops.
• When adding paper to Tray 8 (Inserter), remove any paper remaining in the tray, add it to the
stack of paper to be added, and then load all of the paper into Tray 8 (Inserter) at once.
maximum fill line. It might cause paper
jams or machine malfunctions.
Advertisement
Table of Contents
