Table of Contents
Advertisement
4 Paper and Other Media
Changing the Paper Size
The following describes how to change the paper size for the trays.
Note
For information about paper size, refer to "5 Tools" > "Common Service Settings" > "Other Settings" >
"Paper Size Settings" in the Administrator Guide.
For a description of how to make copies on non-standard size paper, refer to "3 Copy" > "Copy" >
"Paper Supply (Selecting the Paper for Copying)" in the User Guide. For a description of how to print to
non-standard size paper, refer to the print driver's help.
Changing the Paper Size for Trays 3 and 4
4
The following describes how to change the paper size for Trays 3 and 4.
1
Pull out Tray 3 towards you until it stops.
When pulling out the paper tray,
do it slowly. If pulled out with too
much force, the tray can hit and
injure your knees.
Important • While the machine is processing a job, do
2
Remove any paper loaded on the tray.
3
While pinching the two guide levers, move
them to the desired paper size.
4
When the paper guides are positioned correctly, release them.
82
• If you need to change the paper size for trays 1 and 2, contact our Customer Support
Center.
• The paper types for the trays are preset. Normally, plain paper is set. When replacing the
loaded paper with other types of paper, change the paper type settings to match the type of
paper to be loaded to maintain print quality.
For information about changing the paper types, refer to "Changing the Paper Settings"
(P.87).
• When setting a non-standard paper size, you must register the paper size. For information
about registering paper sizes, refer to "5 Tools" > "Common Service Settings" > "Paper Tray
Settings" > "Paper Tray Attributes" in the Administrator Guide.
CAUTION
not pull the tray out that the job uses.
• Do not add a new stack of paper on top of the remaining paper in the tray to prevent paper
jams or misloading.
Advertisement
Table of Contents
