Improving The Paper Feeding Performance In Tray 6 (A3 High Capacity Feeder (Optional)) - Fuji Xerox D125 Quick Reference Manual

4 Paper and Other Media
2
Switch both the weight switch buttons to
[
3
Push the tray in gently until it stops.
Improving the Paper Feeding Performance in Tray 6 (A3 High Capacity
Feeder (Optional))
This section describes how to improve the paper feeding performance.
If images are skewed even when paper is loaded correctly, use the following procedure
so that the paper might be fed more accurately.
Important • If any of the following types of paper is loaded in the tray, performing the procedure in this
4
1
Pull out Tray 6 towards you until it stops.
When pulling out the paper tray,
do it slowly. If pulled out with too
much force, the tray can hit and
injure your knees.
Important • While the machine is processing a job, do
2
Slide the switch on top of the long-side paper
guide to the right until it stops.
Note
74
].
section may cause the paper to be fed improperly, resulting in paper jams.
- Plain - Special 1 (64 - 105 gsm)
- Recycled - Special 1 (64 - 105 gsm)
- Heavyweight SP1 (106 - 216 gsm)
- Extra-HW (217 - 253 gsm)
- Extra-HW SP1 (217 - 253 gsm)
- HW Tab Stock (217 - 253 gsm)
- Labels (106 - 216 gsm)
- Gloss (64 - 105 gsm)
- Gloss B (136 - 216 gsm)
CAUTION
not pull out the tray that the job uses.
• To return the switch to its original
position, slide it to the left until it stops.
Weight switch
buttons
- Pre-Printed SP1 (64 - 105 gsm)
- Plain Reload SP1 (64 - 105 gsm)
- HW Pre-Printed SP1 (106 - 216 gsm)
- X-HW Pre-Printed (217 - 253 gsm)
- X-HW Pre-Printed SP1 (217 - 253 gsm)
- Transparency
- Heavyweight Labels (217 - 253 gsm)
- Gloss A (106 - 135 gsm)
- Heavyweight Gloss (217 - 253 gsm)