Table of Contents
Advertisement
2
Remove the jammed paper.
Note
3
Close the lower left cover.
Note
Paper Jams Inside the Main Unit
The following describes how to clear paper jams inside the transfer module of the main
unit.
Important • Before pulling out the transfer module, check the touch screen to make sure that no paper
1
Make sure that the machine is not in
operation, and open the front cover.
2
Turn the green handle at the center of the
transfer module to the right until it is in the
horizontal position (1), and then pull out the
transfer module until it stops (2).
3
Lift up the handle [2b] (1) to remove the
jammed paper. Turn the knob [2b] (2) to
remove the jammed paper as necessary.
• If paper is torn, check for any torn pieces
of paper in the machine.
• If the lower left cover is not completely closed, a message will appear and the machine will
not operate.
remains in the bottom left/right cover of the machine, Tray 5 (Bypass), the output tray, A3
High Capacity Feeder (optional), A4 High Capacity Feeder (optional), High Capacity Feeder
C2-DS (optional), and the finisher. Paper may be torn if paper remains in these locations
when the transfer module is pulled out.
Paper Jams
6
129
Advertisement
Table of Contents
