Paper Jam In The Bypass Tray - Fuji Xerox DocuPrint 3105 User Manual

Paper Jam in the Bypass Tray

When a paper jam occurs, the following message is displayed.
Paper Jam
In this case, remove the paper according to the following instruction.
1. Remove the paper loaded into the bypass
tray.
2. Grasping the indentations on both sides of
the bypass tray, pull out the tray up to the
position where it stops.
3. Reposition your hands as shown in the
illustration and pull up the bypass tray at an
angle.
4. Remove the paper tray by pulling it from the
printer.
Important
• Be sure to completely pull out the paper trays from the
printer. Half pulling out the paper trays and then
setting them back may damage the paper they hold.
6.1 Clearing Paper Jams
191