Table of Contents
Advertisement
3
Pull out the unit.
4
Hold the positions indicated by an arrow to
remove the staple cartridge from the unit.
5
Push a new staple cartridge into the unit.
6
Push the removed unit back to the original
position.
7
Close the finisher right door.
Note
Replacing the Booklet Staple Cartridge
When the booklet staple cartridge needs to be replaced, a message appears on the
touch screen. When this message appears, replace the booklet staple cartridge.
Important • The use of booklet staple cartridges not recommended by Fuji Xerox may impair quality and
Note
• A message will be displayed and the machine will not operate if the finisher right door is
even slightly open.
performance. Use only booklet staple cartridges recommended by Fuji Xerox for the
machine.
• When the booklet staple cartridge is not replaced properly, the message remains on the
touch screen. Follow the procedure and replace the booklet staple cartridge again.
• To order a booklet staple cartridge, contact our Customer Support Center.
Replacing Consumables
97
5
Advertisement
Table of Contents
