Paper Jams In Trays 6 And 7 (High Capacity Feeder C2-Ds (Optional)) - Fuji Xerox D125 Quick Reference Manual

Hide thumbs Also See for D125:
Table of Contents

Advertisement

6 Problem Solving
2
Move the handle [1d] upwards and remove
the jammed paper.
Note
3
Return the handle [1d] to the original
position.
4
Close the front cover of the High Capacity Tray Unit.
Note
6

Paper Jams in Trays 6 and 7 (High Capacity Feeder C2-DS (Optional))

The following describes how to clear paper jams in Trays 6 and 7 (High Capacity
Feeder C2-DS (optional)).
The following describes how to clear paper jams at the following locations. The
references are as follows:
Note
Paper Jams in Tray 6 to 7 (High Capacity Feeder C2-DS (Optional))
1
Pull out the tray where the paper jam
occurred.
When pulling out the paper tray,
do it slowly. If pulled out with too
much force, the tray can hit and
injure your knees.
124
• If paper is torn, check for any torn pieces
of paper in the tray.
• If the front cover of the High Capacity Tray Unit is not completely closed, a message will
appear and the machine will not operate.
Paper Jams in Tray 6 to 7 (High Capacity Feeder C2-DS (Optional)) .....................................124
Paper Jams in the Lower Left Cover.........................................................................................125
Paper Jams at the Handle [1a] and the Knob [1c].....................................................................126
Paper Jams at the Handle [1b] and the Knob [1c].....................................................................126
Paper Jams at the Handle [1d] and the Knob [1c].....................................................................127
• Remedy differs depending on where the paper jam occurs. Follow the instructions displayed
and remove the jammed paper.
CAUTION

Advertisement

Table of Contents
loading

This manual is also suitable for:

D110D95

Table of Contents